In clothing production enterprises, irons play an essential role, from ironing semi-finished parts to ironing finished clothes.

The average lifespan of an iron is around 9 years, so most irons in a clothing factory may be old hands. Once an old colleague strikes, the entire production schedule will be delayed. Iron strike, some may be caused by improper operation, while others may be due to machine malfunctions. How to distinguish and solve them? Let's take a look at the diagnosis and maintenance of common iron malfunctions with the editor~

1. No fever

Firstly, check if the power supply and power cord are normal, and then check if the power switch is turned on. If the power supply is already connected, consider whether the heater is damaged. If the heater is damaged, corresponding measures should be taken to replace it.

2. No steam ejection

Firstly, it is necessary to confirm whether the water volume in the hanging bottle is below the minimum water level mark and whether the hanging bottle is installed correctly. If there is too little water or the hanging bottle is installed below the iron, there will be no steam; If it is normal, check the solenoid valve and steam switch. If the steam switch has poor contact and the solenoid valve is damaged, it needs to be replaced.

3. Reduced steam volume

This situation is usually caused by scale blocking the steam channel. It is necessary to check whether the vent hole on the bottom plate is unobstructed. At this time, do not use hard objects to brush to avoid damage to the electroplating layer on the bottom plate of the iron bucket. You should first use a water alkali cleaning agent to decompose the scale, and then use a soft cloth to clean it thoroughly.

A set of good ironing equipment can not only reduce the failure frequency of equipment in the production process, but also play the role of finishing touch in the whole garment making process. The three horse series iron adopts a new design scheme and is made of new materials with strong aging resistance and good sealing. The iron base plate is sprayed with TEFLON, which is smooth, wear-resistant and non stick fabric. The product has received widespread praise in the industry and has been awarded the top ten preferred brands in the industry.

If the above faults occur in the iron during the production process, you can try to troubleshoot and restore them yourself. Three Horses Warm Reminder: For malfunctions that require disassembly, it is recommended to hire a professional repairman or contact the manufacturer for maintenance to avoid causing minor malfunctions to become major ones.